Need it by 12/24? Order with GROUND shipping by Tuesday, 12/17 at 11:59 PM Pacific. Shop Now.
Skip Navigation

Tool Handle Re-Gripper Tool Handle Re-Gripper

Tool Handle Re-Gripper

by Re-Grip

Full Details

  • Resistant to solvents, water & weather
  • Anti-slip rubber helps grip tools for added control, comfort & shock absorption
  • Vibration- & heat-resistant up to 300 degrees Fahrenheit
  • Simple, easy installation
  • Small: Recommended for screw drivers, ratchets, brooms, small rakes and shovels, hairbrushes, mini flashlights, socket wrenches and more
  • Medium: Recommended for hammers, pipe wrenches, shovels, large rakes, hatchets, flashlights, trowels, exercise equipment, rakes, fishing poles and more
  • Large: Recommended for wheelbarrows, large pipe or socket wrenches, post hole diggers, sledges, axes and more
  • Grippable design helps reduce muscle fatigue & prevent blisters
  • Electrical shock insulated. Please note: Electrical insulation of up to 1000 Volts only when the user’s hands are entirely on the rubber Re-Grip. User assumes full responsibility for the proper use and safety of their tools and Re-Grip
  • Made in China
Small: 7" x 1.3"; Medium: 7" x 1.6"; Large: 7" x 2.3"
0.40 lb
Product Diameter Clearance
Small: 1.3”; Medium: 1.6"; Large: 2.3"
Shrink range
Small: 0.63" to 1.3"; Medium: 0.76" to 1.6"; Large: 0.98" to 2.2"
Maximum Handle Diameter
Small: 1.1" (28 mm); Medium: 1.5" (38 mm); Large: 2" (51 mm)
Minimum Handle Diameter
Small: 0.68" (17 mm); Medium: 0.79" (20 mm); Large: 0.98" (25 mm)


4.5 avg. (15 reviews)

Perfect solution to my problem.
11/28/2019 by John
I have an old claw hammer that I purchase back in 1968. The rubber on the fiberglass/rubber handle started to separate. I tried silicone but that just made a mess. The re-gripper was the answer. Worked like a charm just as described. Now it's even more comfortable to use.
Nice stuff! Works!
11/07/2019 by Jerald
I've used this on back brush handles and hand-held shower head handles. Worked well. Easy to apply. I even was able to cut it down to size after application in one case.
Difficult to install new grip
10/25/2019 by PAUL
I had difficulty installing both grips. The Plastic pull tab only went about half the length of the handle before breaking. Tried from the opposite end and did not have any better result. So I have a bulge in the middle of the grip that could not be completed.
Good. But!
10/19/2019 by Mark
This item works very well..I put it on my walking stick because my hands sweat and it slips. .But! The thing turns my hand black. Very annoying! Fix that and you will get five stars from me...
Works Perfectly In My Aircraft
06/25/2019 by Douglas
I have an Experimental Aircraft, specifically an A-26 Aeroprakt. The control joystick tape was coming off and it looked terrible. I bought one of these, it looked promising, but I had serious doubts. I thought I would end up with some kind of flimsy rubber material that would start ripping or wearing immediately. Boy was I wrong! The Re-Gripper went on in seconds, and I was able to easily trim the excess off the top. The product looks and feels perfect! I love it! It doesn't slip or slide once in place, which would be terrible in an aircraft. It stays put and looks beautiful! The only thing I might add, is that you guys should put the SIZES on the web site. I took a guess and ordered the MEDIUM, and was luck that I chose the right size for my control stick (which was 1" diameter). Love it! Thanks!
of 3

Tool Handle Re-Gripper

choose option

Add a durable, rubber grip to virtually anything. Unlike tool grip tape, Re-Grip is made from strong elastic, non-slip, and super easy to apply. Once you’ve placed the elastic where you want it, pull the tabs at the bottom to unwind the coil. The coil will constrict the elastic until it’s airtight against the handle. Breathe life into old tools or add a comfortable grip to things that didn’t have one in the first place.


Rather than using tool grip tape, you can add a durable handle to virtually anything, from hammers to tennis racquets to yard tools.

Re-Grip breathes life into old, worn-out handles and can even add a grip to a tool without one. Inside each elastic grip is a helically spun inner coil that allows you to adjust the grip before you’re ready to tighten it around the handle.

Once you’ve placed the elastic where you want it, pull the tabs at the bottom to unwind the coil. The coil will constrict the elastic until it’s airtight against the handle.

We really appreciated Re-Grip’s versatility. Replacement grips are usually specific to the particular tool you’re using and require some expert help. With this intuitive system, you can DIY and the results look professional. more Their Story