Multi-Bit Ratchet Screwdriver

By Rolgear

Add to Wishlist


This multi-bit ratchet screwdriver uses roller-bearing technology that catches immediately and lets you ratchet from any angle. It moves smoothly and is faster and more efficient than typical ratchet drivers. There’s no lost motion trying to get to the next gear, so it results in less effort on your part—and no clicks. Seven double-ended bits store in the handle, and slide out when you need one. An embedded magnet holds a bit for you until you’re ready to insert it.

  • Materials: Screwdriver: Zylar, POM, santoprene plastics, stainless steel; Tool Bits: S2 tool steel
  • Includes: One ratcheting multi-bit screwdriver with seven double ended bits stored in the handle. Tool bits: 1/4" hex drive; slotted 3/16", 1/4"; square 1, 2, 3, 4; Phillips 1, 2, 3, 4; Torx 10, 15, 20, 25
  • Care: Keep dry and free of solvents
  • Instructions: To adjust the direction of the ratchet, hold the shaft with one hand and turn the green knob with the other. To retrieve a stored bit, use the working bit to push the stored bit forward. As the bit leaves the handle, a small magnet embedded in the handle will catch the bit, then insert into the shaft
  • Ultra smooth roller bearing ratchet catches immediately, no lost motion
  • Single-handed ratchet adjustments from forward, locked, and backward
  • Ergonomic, cushion comfort handle doubles as bit storage
  • Magnetic catch for drop-safe bit changing
  • Triangular handle shape prevents screwdriver from rolling
  • Lifetime warranty on ratchet mechanism
  • Made in Canada
  • Dimensions: 8.5" x 1.75" diameter
  • Weight: 0.6 lb.

31 Reviews (4.5 out of 5 Grommets)

Sorted by Rating

Perfect tool

7/14/2018 by Gabriella

I have arthritis in my hands and this multi- bit ratchet screwdriver is perfect. I just put a chicken nest box together with this great tool. Just what the doctor orderedMore > < Less


Need more like this

7/13/2018 by Richard

This screwdriver is the go to in my toolbox. I wish more tools were designed like this. Easy to use smooth action and a decent variety of bits. The bits are also a nice length, easy to handle and change. I have one in my toolbox as I said and bought a second one for the utility drawer for around the house.More > < Less


Addendum to Prior Review

7/12/2018 by Marlene

I would like to change my review to a 5! The Grommet customer service rep was very responsive to my problems and contacted the manufacturer. Allcturer.

All of my problems except the length of the bits have been address and taken care of!

All companies should have such good customer relations.

Thank you!
More > < Less


works as described

7/11/2018 by Dennis

I had the need for my new screwdriver as soon as it arrived! tightening screws in the door lock to my room. And later in the day tightening a loose chair arm.

Surprisingly much easier and more effective then previous tool.
More > < Less


Very sturdy

7/9/2018 by Jaime

Great idea; very easy to use

Items 21 to 25 of 31 total


About Rolgear

Ratchet Right

Robert Suter created the Rolgear multi-bit ratchet screwdriver by channeling his own frustrations with available screwdrivers—like often needing two hands when working with one, and using extra force to get to the next gear. He leaned on over 30 years of tool design experience to make a better driver.

This first thing you might notice when using this ratchet screwdriver is there are no clicks as it reaches the next gear. This is a good thing—those clicks signal wasted motion. Because Rolgear uses roller-bearing technology, it’s gearless. It has a smooth movement that works faster than some traditional drivers. This saves energy and eliminates lost motion. And the driver can begin to ratchet from any angle, too.

Seven double-ended bits store in the handle for easy access while you’re at work. Another smart feature? The triangular-shaped handle means this tool won’t roll out of reach.